1) Heat: thermal conductivity for the 0080-0.135W / (m • k), resistance is about 20-30 times that of ordinary concrete.
2) Light: dry bulk density of 200-700kg/m3, the equivalent of ordinary cement concrete 1 / 5 to 1 / 10 or so buildings reduce the overall load.
3) as a whole: the construction site pouring, with the main works closely combined with the need to stay every other industry and the ventilation pipe joints.
4) Ditan shock: the bubble of the porous concrete so that it has a low modulus of elasticity, making it a good load on the impact of the absorption and dispersion effect.
5) noise: concrete foam contains a large number of independent bubbles, and distribution, sound-absorbing capacity of 0.09-0.19%, which is 5 times that of ordinary concrete, effective noise.
6) resistance: strength for the 0.6-5.5Mpa.
7) water resistance: cast-in-place concrete water-absorbing foam small, relatively independent of the closure of the bubble and a good overall, it has a waterproof performance.
8) durability: the main project with the same life.
9) Construction simple: the only Foamed cement machine can be used to automate operations can achieve a high degree of vertical transmission distance of 100 meters, the workload for the 80-200m3 / day.
10) production and processing: not only foam concrete production in the factory into a wide range of products, but also on-site construction, cast-in-place directly into a roof, floor and wall, and for sawing, planing, nails, drilling Processing and so on.
11) environmental protection: foam concrete raw materials for cement and blowing agents, blowing agents for the neutral, non-benzene, formaldehyde and other harmful substances, environmental pollution and avoid the risk of fire.
12) economy: lower total cost.